Daewoo KOM-9F2CKS, Service Manual, Page: 7 / 40

6
3. CONTROL PANEL
1
2
3 4 6 7 8 9 0 5
1 1
MICROWAVE indicator
It will turn on when the magnetron output actually
is on.
2 2
Double Quantity indicator
It will turn on when DOUBLE QUANTITY pad is
pressed.
3 3
STAGE indicator
It will blink the ongoing stage number of its all
cooking stages.
4 4
CLEAN FILTER indicator
It will turn on during clean filter message
displaying.
5 5
POWER LEVEL indicator
It will turn on when POWER LEVEL pad is
pressed except full power.
6 6
POWER LEVEL pad
POWER LEVEL pad is used to set a variable
power level.
7 7
Number pads
Number pads are used to set the manual
cooking time.
It is also used to start preprogrammed cooking
cycle.
8 8
DOUBLE QUANTITY pad
X2 pad increases a preprogrammed cooking
time by a percentage of the original cooking time.
The user specifies the percentage and it can be
changed for individual cooking sequences.
This feature is very useful for cooking multiple
servings of foods.
9 9
STOP pad
STOP pad stops a cooking sequence in
progress, clears out any remaining time, and
also ends programming or user option cycle.
When STOP pad is used to end a programming
or option change, the changes are discarded.
0 0
START/ 20sec.+ pad
START pad is used to begin a manual cooking
cycle.
It is also used to save any changes to
programming sequences or user options.
START pad can be used as speedy cooking pad.
In ready mode, 20sec.+ pad allows you to reheat
for 20 seconds at full power by pressing it.
By repeatedly touching 20sec.+ pad, you can
also extend reheating time to 5 minutes by 20
second increments.