
8
OPERATIONS AND FUNCTIONS
1. Connect the main lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must
always be in place during cooking.
3. Close the door securely.
4. When the oven door is opened, the light turns off.
5. The oven door can be opened at any time during operation.
The oven will automatically shut off. To restart the oven, close the door and then press START button.
6. Each time a button is pressed, a BEEP will sound to acknowledge the press .
7. The oven automatically cook on full power unless set to a lower power level.
8. The display will show : 0 when the oven is plugged in.
9. Time clock returns to the present time when the cooking time ends.
10.When the STOP/CLEAR button is pressed during the oven operation, the oven stops cooking and all information
retained. To erase all infomation, press the STOP/CLEAR button once more. If the oven door is opened during the
oven operation, all information is retained.
11.When using the GRILL or COMBI mode ;
• Do not open the door so often, the temperature inside the oven decrease and the cooking may not complete in
setting time.
• Never touch the oven window and metal interior of the oven when taking food in and out, because of the
temperature inside the oven and door is very high.
• When using these modes, be careful as the tray will be hot to touch, use oven gloves or pot holders while
handling tray.
Wattage output chart
The power level is set by pressing the POWER/DEFROST button. The chart shows the display, the power level and
the percentage of power.
Make sure the oven is properly installed and plugged into the electrical outlet.
Once
P-HI
100%
Twice
P-80
80%
3 times
P-60
60%
4 times
P-40
40%
5 times
P-20
20%
Touch Power button
Power level(Display)
Approximate Percentage of Power
Summary of Contents for KOG-8B5R5S
