once
P-HI
100%
twice
P-90
90%
3 times
P-80
80%
4 times
P-70
70%
5 times
P-60
60%
6 times
P-50
50%
7 times
P-40
40%
8 times
P-30
30%
9 times
P-20
20%
10 times
P-10
10%
11 times
P-00
0%
Touch MICROWAVE pad
Power level (Display)
Approximate Percentage of Power
9
OPERATION PROCEDURE(MICROWAVE OVEN)
The oven light is on only when the microwave oven
is operating.
The oven door can be opened at any time during
operation by touching the door release button on the
control panel. The oven will automatically shut off.
Each time a pad is touched, a BEEP sounds to
acknowledge the touch.
The oven automatically cooks on full power unless
set to a lower power level.
The display will show “ : 0” when the oven is plugged
in.
Time clock returns to the present time when the
cooking time ends.
When the Microwave STOP/CLEAR pad is touched
during the oven operation, the oven stops cooking and all
information retained. To erase all information(except the
present time), touch the STOP/CLEAR pad once more.
If the oven door is opened during the oven operation, all
information is retained.
If the Microwave START pad is touched and the oven
does not operate, check the area between the door and
door seal for obstructions and make sure the door is
closed securely. The oven will not start cooking until the
door is completely closed or the program has been reset.
This section includes useful information about Microwave oven operation.
1. Plug power supply cord into a standard 3-pronged 20Amp, 120V AC 60Hz poweroutput.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the Microwave oven door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the MICROWAVE pad. The chart shows the display, the power level and the
percentage of power.
