5
6
OPERATION
COOKING UTENSILS
CARE AND CLEANING
Although your oven is provided with safety features, it is important to observe the following:
1. It is important not to defeat or tamper with safety interlocks.
2. Do not place any object between the oven front face and the door or allow residue to
accumulate on sealing surfaces. Wipe the sealing area frequently with a mild detergent,
rinse and wipe dry. Never use abrasive powders or pads.
3. When opened, the door must not be subjected to strain, for example, a child hanging on
an opened door or any load could cause the oven to fall forward to cause injury and also
damaged to the door. Do not operate the oven if it is damaged, until it has been repaired
by a trained service technician.
It is particularly important that the oven closes properly and that there is no damage to
the:
i) Door (bent)
ii) Hinges and Hookes (broken or loosened)
iii) Door seals and sealing surfaces.
4. The oven should not be adjusted or repaired by anyone except a properly trained service
technician.
Connect the mains lead to an electrical socket-outlet.
After placing the food in a suitable utensil, open the oven door and put it on the glass
turntable. Glass turntable must always be in place during cooking.
Shut the door.
Make sure that it is firmly closed.
How to set each function
To set MICROWAVE Cooking
• Set the variable POWER SELECTOR to the desired power level.
To set GRILL Cooking
• Set the POWER SELECTOR to the (grill) position.
To set COMBI Cooking
• Set the POWER SELECTOR to the (combi) position.
Set the time control by turning the timer knob and then the oven operate in selected
cooking mode. If turning the timer knob for less than 2 minutes, turn it past 2 minutes
and then back to the desired time.
The oven will be turned off automatically when the timer point to “OFF”.
Then take out foods.
• To prevent the oven operating with the door open, your is fitted with safety door
interlock switches. If you wish to inspect the food during the cooking time, simply open
the door. The oven will automatically stop the cooking.
•
To continue cooking, you simply close the door.
• If you wish to stop the cooking during the cooking simply turn the timer knob the point
“OFF”. Cooking can be reset at any time during the cooking cycle by only turning the
timer knob.
• Do not let the timer continue to operate after removing food.
NOTE: When using the GRILL or COMBI mode;
• Do not open the door so often, the temperature inside the oven decrease and the
cooking may not complete in setting time.
• Never touch the oven window and metal interior of the oven when taking food in and
out, because of the temperature inside the oven and door is very high.
• When using these modes, be careful as the tray will be hot to touch, use oven gloves or
pot holders while handling tray.
1
2
3
4
5
6
7
SYMBOL
POWER LEVEL
OUTPUT POWER
DEFROST
33%
MED-HIGH
77%
HIGH
100%
Before use, the user should check that tensils are suitable for use in microwave ovens.
Material
Glass (general)
No
Yes (1)
No
Glass (heat resistant)
Yes
Yes
Yes
Glass-ceramic and ceramic (heat resistant)
Yes
Yes (1)
Yes (1)
Earthenware
Yes
Yes
Yes
China (heat resistant)
Yes
Yes
Yes
Plastic (general)
No
Yes (2)
No
Plastic (heat resistant)
Yes (2)
Yes (2)
Yes (2)
Aluminium foil containers/aluminium foil
Yes
Yes (3)
Yes
Metal baking tins
Yes (4)
No
Yes (4)
Metal (pots.pans, etc)
Yes
No
No
Paper
No
Yes
No
1. Without metal parts or metal trims.
2. Some plastics are heat-proof only to certain temperatures.
Check carefully!
3. It is possible to use aluminium foil to shield deliate areas of food
(this prevents over-cooking).
4. Metal tins can be used in the combination methods, however if these are vary deep,
they will greatly reduce the efficiency, as metal shields the microwave energy from the
food.
Grill
cooking
Microwave
cooking
Combined
cooking
