21
1. To remove cabinet.
Remove three screws (F02) on cabinet back.
2. To remove door assembly.
1) Remove two screws (F40) which secure
the top hinge seoppr (F37).
2) Remove the door assembly (F00) from the
top plate of cavity.
3) Reverse the above for reassembly.
3. To remove door parts.
NOTE:
After replacing the door preform a
check of correct alignment with the
hinge and cavity front face.
Summary of Contents for KOG-261M
