22
12. TO REMOVE STIRRER FAN
1) Remove a screw to the cover wave guide.
2)Push the fixture supporter in top plate.
3) Remove a holder stirrer from the stirrer motor.
4) Rotate the holder stirrer about 45°C and reassemble from
groove of the stirrer blade.
5) Remove holder stirrer and supporter stirrer.
6) Reverse the above steps for reassembly.
Fixture
Supporter
Stirrer
Holder Stirrer
Supporter
Stirrer
Stirrer Blade
13. TO REMOVE NOISE FILTER
1) Remove a screw which secure the noise filter.
2) Remove a screw which earth to wire from noise filter.
3) Remove a noise filter from the bracket noise filter.
14. TO REMOVE SPEAKER
1) Remove a screw which secure the base plate and
speaker holder
2) Remove speaker holder and speaker
COVER
WAVE
GUIDE