18
6. To remove high voltage capacitor
1) Remove a screw which secure the grounding ring
terminal of the H.V.diode and capacitor holder.
2) Remove the H.V.capacitor from the capacitor holder.
3) Remove the H.V.diode from the H.V.Capacitor.
4) Reverse the above steps for reassembly.
1) Connect two terminals(
1
) from H.V. transformer to
magnetron using the all-in-one connector.
2) Connect the connector, which connected two wires(
2
)
from H.V. transformer, to H.V. capacitor .
3) Connect H.V. diode(
3
) to H.V. capacitor in same
location with terminal
2
4) The one direction of
4
connect to secondary terminal of
H.V. transformer and another connect to H.V
capacitor(except of terminal
2
,
3
)
H.V.Capacitor
H.V.Diode
Capacitor Holder
NOTE: Connecting procedure of magnetron, H.V.
transformer, H.V, diode, H.V. fuse, H.V.
capacitor.