Daewoo KOC-1B0K0S, Service Manual

Page: 17 / 42

16
12. To remove Rear heater assembly parts.
1) Remove two screws 1 and then pull out Cover motor *B 2 .
2) Remove two screws 3 and then pull out Cover *B 4 .
3) Pull out the Harness convection-B 5 .
4) Remove four screws t and then pull out the Rear heater assembly.
5) Remove a Nut q and then pull out the Fan convection 0 and Washer plain 9 .
6) Remove a screw 8 and then separate the Cover heater *B 7 and the lnsulator heater *B r .
7) Pull out two Heaters 6 from the Cover Heater *B 7 .
8) Remo two screws e and then separate the lnsulator heater *B r and Motor shaded pole y .
9) Remove the Ring-C i and then pull out the Fan u from Motor shaft.
10)Reverse the above steps for reassebly.
11
10
9
12
8
7
13
14
15
16
17
18
6
5
4
3
2
1
REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK
1 7S312X40A1 SCREW SPECIAL T1 TRS 4*10 SE MFZN 2
2 3511407300 COVER MOTOR *B SBHG T0.6 1
3 7S312X40A1 SCREW SPECIAL T1 TRS 4*10 SE MFZN 2
4 3511407400 COVER *B SBHG T0.6 1
5 3512766900 HARNESS CONVECTION-B KOC-1B0K0S 1
6 3512803800 HEATER MIRACLON 115V 550W 270MM 2
7 3511407700 COVER HEATER *B SA1D T0.5 1
8 7113400814 SCREW TAPPING T1 BIN 4X8 MFNI 1
9 7400104011 WASHER PLAIN PW-1-4 MFNI 1
10 3511800700 FAN CONVECTION SA1D T0.5 1
11 7S627W50X1 NUT HEX NUT FLANGE M5X0.8P MFZN 1
12 3512766800 HARNESS CONVECTION-A KOC-1B0K0S 1
13 7601400811 SCREW MACHINE PAN 4X8 PW MFZN 2
14 3513302900 INSULATOR HEATER *B SA1D T0.5 1
15 7113400814 SCREW TAPPING T1 BIN 4X8 MFNI 4
16 3963514330 MOTOR SHADED POLE 230V 50HZ MW10CA-T03 1
17 3511800900 FAN PBT 1
18 7402704600 RING-C CR-5 SK5 1