8
Upright Fan Heater
Model No. HEA1926
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
•
Return the
On/Off/Fan/Heat Switch
(4) to the
(
O
) position to switch off the
heater.
Fan Only Mode
•
Rotate the
On/Off/Fan/Heat Switch
(4) to the fan only position ( ) to enable
the fan to operate for cool air output.
The
Thermostat Control
(3) will need to be rotated to the fully clockwise
position for the fan to operate.
Care and Use of Your Fan Heater
•
Always disconnect the heater from the mains power supply and allow to cool
before cleaning.
•
Clean outside of the heater with a clean damp cloth. Never clean with harsh or
abrasive cleaners.
•
DO NOT
submerge any part of the heater in water or any other liquids.
•
DO NOT WRAP THE MAINS CABLE AROUND THE APPLIANCE.
Safety Cut
–
Out
WARNING!
This appliance is fitted with a built-in safety cut-out, if the cut-
out is activated the unit stops working, unplug the heater from the mains and
check that the air intake area is not blocked or covered.
Leave for an hour to cool and reset before plugging back into the mains.
Technical Specification
Rated Voltage
220-240V~ 50Hz
Rated Power
1800-2000W
Model Number
HEA1926
Dimensions
265mm (H) x 225mm (W) x 125mm (D)
Weight
0.9kg
Protection Class
II
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable plug fitted to the mains lead
and should the fuse need replacing, you must use an ASTA approved one
(conforming to BS 1362 of the same rating). If in doubt, consult a qualified
electrician. Never use a plug with the fuse cover missing.
If you need to remove the plug –
DISCONNECT FROM THE MAINS
– and then cut
it off the mains lead and immediately dispose of it safely. Never attempt to reuse
the plug or insert it into a socket outlet as there is a danger of electric shock.