7
Upright Fan Heater
Model No. HEA1926
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Description of Controls
1.
Air Outlet
2.
Indicator
3.
Thermostat Control
4.
On/Off/Fan/Heat Switch
5.
Air Intake
Before first use of Your Fan Heater
Remove all packing materials and discard responsibly.
Operating Instructions
–
heat setting
•
Place the heater on a solid, level non-flammable surface.
•
Ensure that the
On/Off/Fan/Heat Switch
(4) is in the off (O) position
•
Insert the mains plug into the mains socket.
•
For the low heat setting (1000W), rotate the
On/Off/Fan/Heat Switch
(4) to the
low heat position (I).
•
For the high heat setting (2000W, rotate the
On/Off/Fan/Heat Switch
(4) to the
high heat position (II).
•
Rotate the
Thermostat Control
(3) clockwise to increase the room temperature
and anticlockwise to decrease the room temperature as desired.
The
Indicator
(2) will illuminate on and off to indicate that the set temperature
is being maintained, this quite normal.
•
Return the
On/Off/Fan/heat Switch
(4) to the
(O) position to switch off the
heater.
Hint on setting the Correct Temperature
•
Set the heater to the desired heat setting as above.
•
Rotate the
Thermostat Control
(3) to the maximum position and allow the
room to warm up. Once the desired room temperature has been reached turn
the
Thermostat Control
(3) anticlockwise until the heater just clicks off then
turn it back up clockwise very slightly. The
Thermostat Control
(3) will now
maintain the room temperature, if necessary, further increasing or decreasing
the
Thermostat Control
(3)
may be required to ‘fine tune’ the ideal room
temperature.
5
4
3
1
2