7
1200W PTC Fan Heater
Model No. HEA1814
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
1.
Place the heater on a solid, level non-flammable surface so that the heater is
vertical.
2.
Ensure that the
Mains Switch
(1) on the rear of the unit is in the
OFF
(O)
position.
3.
Insert the mains plug into the mains socket.
4.
Press the
Mains Switch
(1) on the rear of the unit to the
ON
(I) position.
5.
Press the
On/Off
button (7) to switch on the fan heater. The
Digital
Temperature Display
(4) will light to show the current room temperature as
below:
6.
Press the
Mode
button (8) to select from the
following modes:
a.
Fan Only Mode
–
Press the
Mode
button
(8) until the
Mode LEDs
(10) all light blue
to show the fan heater is in fan only mode
as shown right:
b.
Low heat setting
(600W)
–
Press the
Mode
button (8) until the
Mode LEDs
(10)
light with just the centre LED lighting red
to show the fan heater is in the low heat
mode as shown right:
c.
High Heat Setting (1200W)
–
press the
Mode
button (8) until the
Mode LEDs
(10)
light all red to show the fan heater is in
the high heat mode as shown right: