Before the first time you use your Convector Heater
Please read these operating instructions thoroughly and keep them in a
safe place for future reference.
Remove all packing materials and discard responsibly.
Assembling your Convector Heater
Before using this heater, the feet must be fitted to the unit. These are
attached to the base of the heater using the four self-tapping screws
provided, take care to ensure that they are located correctly in the holes at
either end of the base of the appliance:
Description of Controls
Switch 2
Switch 1
NB
Both
Switches are
shown in the
off position
Thermostat
Summary of Contents for HEA1146
Page 7: ......