13
1-4. Sleep Mode
Input
Control Object
Contents
Remark
1. SLEEP
Button
2. RT-Sensor
1. COMP
2. R-FAN
3. F-FAN
4. Custom LED
1. The mode starts with push of Sleep Button.
2. Terms to start Sleep Mode
1
F-Sensor
≤
-13°C
1
Reinput within 40 minutes after the termination of Sleep mode
2
F-Sensor Error
3
Door Switch Error
5
In Defrosting (Heater Defrosting, Pause, Fan Delay)
6
If
1
through
5
are all satisfied, the Sleep mode starts.
3. Control of Electrical Parts
1) MODE 1
- When Sleep mode starts, all the parts (COMP, F-FAN, R-FAN) turn
OFF.
- Only Sleep ICON turns ON and the other LEDs are OFF.
2) MODE 2
- Fan voltage changes to 8V with Silent operation.
- The elses are same as 1).
4. Terms to be Sleep Mode OFF
1) Mode 1
1
F-S
≥
-9°C
2
Excess of limit time of 130 minutes
3
F-Sensor Error
4
Repush of Sleep Button during the mode
5
Total door open time is over 30 seconds during the Sleep mode.
6
If Sleep mode is terminated by
1
,
2
,
3
, F/R-Fan Delay (5min-
utes), reinput prevention of Sleep (40minutes) are setup.
2) Mode 2
1
The mode turns OFF 12hours after the start.
2
Overload operation and Defrosting during Sleep mode are same
as normal mode.
6. When Sleep mode is terminated, all the electrical parts and C-LEDs
return to normal state.
7. If Sleep starts during Pre-Cool, it operates again through the rest after
the Sleep.
8. If Sleep starts during Quick Freezing or Quick Refrigeration, previous
mode operates for the rest of the time after the Sleep mode.
