43
Time Lapse Video Cassette Recorder
42
Time Lapse Video Cassette Recorder
Periodic Inspection and Maintenance
Periodic inspection and maintenance should be referred
to your dealer. If there is noise in the playback picture,
and it cannot be corrected using the tracking
control, it may indicate that the video heads need
cleaning. The video heads should be cleaned and
inspected every 1,000 hours. The video heads usage can
be checked using initial menu, running time.
System Down
If the unit does not function at all, try the following.
1
Unplug the power cord then plug it back in.
2
Reset the memory. (Press the RESET button. Under
normal conditions, do not touch the RESET button.)
3
If the problem is not corrected after performing
steps 1 and 2, consult your dealer.
✔
• Press the RESET button for
more than 0.5 seconds to
perform the reset. Running
Time will not be reset.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
Timer recording.
Alarm recording.
Noise in the
playback
picture.
The date and
time are not
recorded.
The cassette tape
cannot be
ejected
The unit is not set to timer recording
stand–by mode.
“N” is selected for the TIMER
PROGRAM SET.
“NO” is selected for alarm recording
in the ALARM REC SET menu.
The tracking adjustment is in the
wrong.
The video heads need cleaning.
“NO” is selected for the date and time
in the DISPLAY SET menu.
The date and time go off the
ON–SCREEN by pressing the DISPLAY
button.
Problem with the system or tape.
– Press the POWER(STANDBY/ON)
button to display “
” on the
display panel.
– Be sure to select “Y” for the TIMER
PROGRAM SET.
– Be sure to select “YES” for alarm
recording.
– Adjust it by using the manual
tracking.
– Clean the video heads.
– Be sure to select “YES” for the
display.
– Press the DISPLAY button to show
the date and time.
– Unplug the power cord then plug it
back in.
Error Display
Error Mode
How to solve
E–01
TAPE IN/OUT is impossible
Press POWER key
E–02
TAPE Running is impossible
Press POWER key
E–03
DRUM Running is impossible
Press POWER key
E–04
TAPE is cut
Press POWER key
E–05
Error at DEW Sensor happens
Refer to DEW Sensor.
