5
- This product is free of CFC’s (cooling circuit contains R134a
or R-600a). Check the compressor label on the rear of the
appliance or the rating label inside the fridge to see which
refrigerant is used for your re f r i g e r a t o r.
HOW TO USE THE REFRIGERATOR COMPARTMENT
Connet the lead to the mains. ( At least wait 2 hours after
delivery: refer to section ”Before connecting to the mains)
Food can be stored after 3 to 4 hours cooling.
- the interior light switches on when the door is opened;
- the compressor operates and starts cooling;
The suitable storage temperature for fresh food is provided in
the "MID" position at an ambient temperature of 16 ~ 32ºC.
MODEL: ERF-364(5)A..., ERF-384(5)A..., ERF-94(5)A...,
ERF-414(5)A...
TEMPERATURE CONTROL PANEL
(See flap at the back of the manual.)
1
“VAC” Energy saving, e.g. when you are away from home
for a long period.
2
“SUPER FREEZING” Instant cooling with powerful supply
of cold air.
3
“FREEZER” Indicator of freezer room temperature
condition.
4
“REFRIGERATOR” Indicator of refrigerator room
temperature condition.
5
“LOW” Means that freezer & refrigerator compartment
temperature is warmer than position “MID”.
6
“MID” Means normal storage temperature.
7
“HIGH” Means that both compartment temperatures are
colder than position “MID”.
8
“TEMPERATURE CONTROL” button
- When you connect the lead to the mains, lamps
3
,
4
will
illuminate and will go red, due to the high temperature of the
compartments: after some time they turn green.
- The interior light switches on when the door is opened.
- The compressor operates and starts cooling.
1. If you want to change the compartment temperature, push
button
8
. If you press this button, the lamps
1
,
2
,
5
, o
6
and
7
will illuminate in sequence. Push the button, so
you can set the temperature that you want.
Note
Initially both compartments temperatures are set “MID”
position automatically.
2. The suitable storage temperature for fresh food is provided at
“MID” position at an ambient temperature of 16ºC to
32ºC.
MODEL: ERF-367(8)A..., ERF-397(8)A...,
ERF-417(8)A....
1. See the CONTROL PANEL. There are three buttons,
“FUZZY”, “CONTROL” and “TEMP” on it.
Note:
If you connect the lead to the mains, you can see the lights of
the control panel display are on and Initially both compartments
temperatures are set to “4” position automatically.
2. If you want to change the compartment temperature, push
“CONTROL” button. When you press this button, the
lights illuminate in sequence. It is composed of 7 steps. It
follows VAC
R
1(LOW)
GENERAL RECOMMENDATIONS
Keep air vents open.
No glass bottles in the freezer
compartments. The bottles might
burst.
Ice cubes and ice lollies straight out
of the freezer are too cold for
consuming.
They may cause ‘cold’ burns.
Do not allow children to play or hide
in the refrigerator to prevent the risk
of trapping and suffocation.
Always unplug before cleaning and
servicing.
If the supply cord is damaged, it
must be replaced by the
manufacturer or its service agent or
a similarly qualified person in order
to avoid a hazard.
English
