13
12
Installation
Setting up your player
With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the
[TV/VCR] button on the remote control, your TV will automatically display the CH ARD. “VCR” will be
displayed.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.
To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will
get better pictures and sound quality if you connect your player with a scart lead.
■
Before you start, unplug all the equipment from the mains supply.
Television
Aerial
The type of aerial you
should use, depends on
local interference and how
far you are from the
transmitter. You should
contact a local retailer if you
have any questions about
your aerial.
Back view of your player
200-240V~,
50/60 Hz
Television
Aerial
Back view of your player
200-240V~,
50/60 Hz
Scart lead (not supplied)
(Option 1) - Connecting your player through RF lead
(Option 2) - Connecting your player through a scart lead
Connecting your player through
extra equipment (satellite system)
■
Before you start, unplug all the equipment from the mains supply.
Television
Aerial
Back view of your player
200-240V~,
50/60 Hz
You can use this connection if your player has two scart sockets. This will improve sound and picture quality
when you are recording from satellite.
Satellite
(Option 1) - Connecting your player through RF lead
