background image

17

• Is there a power failure?

• Is the power cord correctly connected to an electric outlet?

• Is the electric fuse broken?

• Did you turn on the power?

• Did you press Start/Hold button?

• Is there correct amount of water in the tub?

• Did you connect the inlet hose and open the water tap?

• Is the inlet hose or the water tap frozen?

• Is the water supply shut off?

• Does foreign matter block up the inlet hose filter?

• Is the drain hose frozen or blocked up by dirt?

• Is the drain hose kinked or deformed?

• Is the end of the drain hose immersed in water?

• Is there excessive dirt inside the pump housing?

• Is the clothe in the tub collected on one side?

• Is the washing machine installed on an uneven floor or is the

vibration serious?

• Is the lid open?

(The lamp   will light up in this case.)

TROUBLE SHOOTING

Most problems are easily solved if you understand the cause.

Check the following list for problem before calling for service.

If error mode such as  ,  ,   were displayed on the control part,

in this case, how to solve these problem is first open and close the Door(Lid),

and then press START/HOLD button.

Before calling for service, check these

• The washer will not 

operate at all.

• Water is not supplied;

If water supply is not finished 

within 20 minutes, the lamp 

 will light up, and the buzzer 

will sound to indicate a 

problem.

 

PROBLEM 

CHECK POINT

These cases are not malfunctions

• The sound "wing" heard during water supply is the operating sound made by the water inlet 

valve.

• The sound "sha" heard in stopping the tub is the sound that comes from the autobalancer of 

the tub.

• The washer will not drain;

If the drain is not finished within 

selected time, lamp 

 will 

light up, and the buzzer will 

sound to indicate a problem.

• The washer will not spin;

during spin and the tub becomes 

unbalanced, the spin operation will be 

interrupted, and then this unbalanced 

condition will be corrected by following 

operation: WATER SUPPL 

 RINSE 

 

DRAIN However if the unbalanced 

condition is unchanged despite 

repeating the above operation, the lamp 

 will light up, and the buzzer will 

sound to indicate a problem.

DWF-ELC55BGN,DWF-ELC55GPN(영)_호주향.indd   17

16. 7. 8.   오후 12:08

Summary of Contents for DWF-ELC55BGN




















Reviews: