15
1
Put down the remained
water in the hose. And put
a container under the filter
to collect water.
2
Turn the cap counter
clockwise.
3
Pull out the filter assembly
off the case.
4
Clean the drain filter
removing the foreign
stuffs.
5
Put the filter into the case.
And turn the cap to adjust
the prominence of the
filter to the hole of the
case.
6
Turn the cap clockwise
tightly.
1
Pull the Fiter frame
up-ward.
2
Turn the lint filter inside
out, wash to the lint off
with water
3
Return the filter as it was,
and insert the filter frame
into the slot
1
Pull the power
plug out before
cleaning it.
2
Turn off the water
supply to the
washer and
sperate the inlet
hose.
3
Pull the inlet filter
out.
4
Remove the dirt
from the inlet filter
with a brush.
HOW TO CLEAN THE FILTER
Cleaning the Lint Filter
Cleaning the water inlet filter
• Clean the filter when water leaks from, the water inlet.
Cleaning the drain filter
• In case “Pump-Model” drain hose, this filter’s equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc...
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be
caused. see page.
FILTER
FILTER
FILTER
CAP
CAP
CAP
CAP
CAP
CASE
CASE
STOPPER
STOPPER
CONTAINER
DWF-ELC55BGN,DWF-ELC55GPN(영)_호주향.indd 15
16. 7. 8. 오후 12:08
