background image

10

GUIDES FOR OTHER USEFUL PROGRAMS

Reserved Washing

• Reservation can be made from 2 hours to 48hours.

example) To make reservation to complete washing in 8hours.

• Now the reservation is mode.
• WOOL course is not selected.
• The displaying time shows the finishing time you want.

Partial Selection Among Wash, Rinse or Spin

REMAIN

adjust to "8"

REMAIN

"--" shall blink

adjust to
the course
you want.

close
the lid

HOUR

RES

HOUR

RES

RES.

RES.

COURSE

HOLD

START

Procedure of processing

Only Wash

Only Rinse

Wash &
Rinse

Wash & Spin

Only Spin

Again the
Rinse &
Spin, after
washing

Only Drain

1

Press

the Power
button

2

Select the

washing time what
you want.

2

Select the rinsing

times what you want.

2

Select the

washing time &
rinsing times what
you want.

2

Select the

washing time&
spining time what
you want.

2

Select the

spining time what
you want.

2

Select the rinsing

times & spining time
what you want.

2

Press the Spin

button.

Partial

process

POWER

WASH

RINSE

RINSE

WASH

WASH

SPIN

RINSE

RINSE

SPIN

SPIN

3

Select the water

level and water
temperature what
you want.

WATER

 LEVEL

WASH

 TEMP.

4

Press the

Start/Hold button
with closing
Lid(Door)

. After this process,
the Drain Process is
not happen.
If want, use the Spin
button.
(Refer to below)

HOLD

START

After process, the
buzzer give the
information.
And then, The
Power switch will be
soon turned off
automatically.

3

Press the 

Start/Hold button
with closing
Lid(Door)

HOLD

START

3

Press the 

Start/Hold button
with opening
Lid(Door)

After process, the
buzzer give the
information and PCB
display the “LE”
signal.
But, The Power
switch is not turned
off automatically.

HOLD

START

DWF-200/240M(101) 

 

97.1.19 

4:21 

PM 

 

˘

`

10

Summary of Contents for DWF-200M

















Reviews: