Daewoo DWF-1089, Manual, Page: 9 / 38

6. FEATURE AND TECHNICAL EXPLANATION
12 EXPLANATION
WASH DRAIN SPIN FILL RINSE 1 DRAIN SPIN FILL RINSE 2 DRAIN •••
MOTOR C.W
SINGAL C.C.W
TIME(SEC.) 0.3 0.5 0.3 0.5 0.3 0.5 • • • • • • •
20 SEC. (About 13 Times)
FILL WASH STOP WASH STOP WASH STOP
• 2’ 8’ 2’ 8’ 2’ 8’
SOAK PROCESS MAIN PROCESS
30 Minute
Feature of the Washing Machine
1
The first air bubble washing system in the world.
2
Quiet washing through the innovational low-noise design.
3
The wash effectiveness is much more enhanced because of the air bubble washing system.
4
The laundry detergent dissolves well in water because of the air bubble washing system.
5
The adoption of the water currents to adjust the unbalanced load.
6
One-touch operation system.
Water Current to Adjust the Unbalanced Load
It is a function to prevent eccentricity of the clothes after wash by rotating pulsator C.W and C.C.W for 20
seconds.(But, the DRY & SILK course have no operation of the water currents to adjust the unbalnced load.)
EFFECT
It reduces vibration and noise effectively while spinning.
WATER FLOW
Function for Soak Wash
DISPLAY THE RESIDUAL TIME
When the SOAK WASH is selected, the total wash time increases because 30 minutes for soak process are added
to the time of main process.
PROGRESS
Automatic Water Supply System For Blanket Wash
The water level would be lowered because the blanket absorbs water at the beginning of washing. Therefore, after
30 seconds, the operation is interrupted to check the water level, and then the water is supplied again until the
selected water level is reached.
‘ ’ mark indicates the operation of the water currents to adjust the unbalanced load.
NOTES