background image

12

USING THE DISPENSER

The automatic dispenser consists of four compartments which hold 1) liquid chlorine bleach, 2) liquid
fabric softener, 3) liquid or powdered detergent for prewash and 4) liquid or powdered detergent and color
safe bleach for main wash.
All laundry products can be added at once in their respective dispenser compartments.
They will be dispensed at the appropriate time for most effective cleaning. After loading the laundry
additives into the dispenser, close the dispenser drawer.

Add detergent, bleach and fabric softener to the automatic dispenser following these steps:
1. Open the dispenser drawer.
2. Load the laundry products into the appropriate compartments.
3. Close the dispenser drawer.

About detergent

Your washer is designed to use only High Efficiency (HE) detergents.
HE detergents are formulated specifically for front load washers and contain suds reducing components.
HE detergents make less suds, improve washing and rinsing performance, and help to keep the interior of your
washer clean. Use the manufacture’s recommend amount.
If a regular detergent is used, it may cause oversudsing and unsatisfactory performance.
For the best washing and rinsing performance, low-sudsing HE detergents are strongly recommended.

1. Prewash Detergent Compartment

• Add detergent to this compartment when using the

Prewash option. Liquid or powdered detergent may
be used in this compartment. The detergent will
automatically be dispensed during Prewash if the
Prewash option in selected.

• Add 1/2 the recommended amount of detergent to

the Prewash compartment and the recommended
amount of detergent to the main wash
compartment.

NOTE: Liquid detergent will drain into the washer

drum as it is added.

Designed specially to use only
HE(High Efficiency) detergent

Main-wash

Bleach

softener

Pre-wash

Summary of Contents for DWD-WD3011WW







































Reviews: