background image

32

32

6-1. IE (Input Error) - Error in water supply

1) Conditions of Occurrence
     

  In case the designated water level is not reached in 5 minutes during water supply or re-supply

2) All LEDs are turned off and 'IE' blinks in18:88 display.

3) Error buzzer alarm is sounded for 10 seconds per every 10 minutes.

4) Error display is cleared when turning off/ on power.

6-2. OE (Output Error) - Error in drainage

1) Conditions of Occurrence
     

  In case water level does not reach reset point in 10 minutes after drainage starts

2) All LEDs are turned off and 'OE' blinks in 18:88 display.

3) Error buzzer alarm is sounded for 10 seconds per every 10 minutes.

4) Error display is cleared when turning off/ on power.

6-3. UE (Unbalance Error)

1) Conditions of Occurrence
     

  In case main spin-drying is not reached within 20 cycles of balance spin-drying

     

   In case balance spin-drying fails during interim spin-drying, UE occurs as the cycle moves to the 

next process.

2) All LEDs are turned off and 'UE' blinks in 18:88 display.

3) Error buzzer alarm is sounded for 10 seconds per every 10 minutes.

4) Error mode is cleared by opening door and organizing the laundry in spin-dry chamber, closing door and 

pressing start/ temporary stop button. Then, spin-drying begins again. 

 

6-1. Error Display

Summary of Contents for DWD-L1021






















Reviews: