Daewoo DWC-LD141 Series Instruction Manual Download Page 9

Page: 9 / 32

E-9

Operating your washer

(cont.)

Sorting

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together.

• Separate dark colours from light colours, colourfast items from non-colourfast item.

ㄴ

Loading

• Drop items into washer loosely. Items should move easily through wash water for best cleaning and wrinkle-

free results.

• Load washer properly and select correct load size setting.

Overloading and selecting a setting too small for the wash load can :

- Cause poor cleaning

- Increase wrinkling

- Create excessive lint

- Wear out items faster (because of pilling)

• Mix large and small items in each load. Load evenly to maintain washer balance.

An unbalanced load can make the washer vibrate during spin or not complete spin cycle.

• Reduce wash time when using a small load size setting. Loads with only a few small items needs less

wash time.

• Use a large load size setting to reduce wrinkling with permanent press clothes and some synthetic knits.

These items should have more room to move in the water than heavy items. (towels, jeans)

Adding detergent

Soil (Heavy, Normal, Light)

Separate clothes according to amount of soil.

Colour (White, Lights, Darks)

Separate white clothes from coloured clothes.

Lint (Lint producers,Collectors)

Wash lint producers and lint collectors separately.

Detergent case

Adding fabric softener

• If desired, add measured liquid fabric softener

to the softener inlet.

• Pour liquid fabric softener into the dispenser using

the amount recommended on the package.

• Do not exceed the maximum fill line.

Overfilling can cause early dispensing of the fabric

softener which could stain clothes.

• Do not open the detergent case when water is

supplied.

• Avoid pouring fabric softener directly on the clothes.

• Please use the proper amount of detergent in conformity with the instruction of the detergent

manufacturer.

• A use of a large amount of detergent more than the recommended amount can cause many soapsuds

and the overload to the motor.

This will also deteriorate the washing and rinse performance.

Main wash

Pre wash

Fabric softener

DWC-LD141X_DWD-LD141X(영)_영국향.indd 9

2015-03-03 오후 4:32:29

Summary of Contents for DWC-LD141 Series

































Search results

Summary of Contents for DWC-LD141 Series

Reviews:

Related manuals for DWC-LD141 Series

Brands by name

Popular brands

Daewoo DWC-LD141 Series, Instruction Manual

Search results

Summary of Contents for DWC-LD141 Series

Reviews:

Related manuals for DWC-LD141 Series

Brands by name

Popular brands