4
Water Inlet
Wash Timer
Wash Selector
Spin Timer
Drain Selector
(Pump control)
Control Panel
OPERATING INSTRUCTIONS
Emptying
Set the valve selector knob to "drain" and the wash timer to 3-5 minutes.
The machine will now empty.
Set the drain selector knob to "wash-rinse".
Switch off the electricity at the
power point.
Lint Filter
Remove the filter frame by pulling it upward (Fig. 2-(1)).
Turn the filter inside out and wash the lint off with water (Fig. 2-(2)).
Insert the filter frame into the agitator hole as it was (Fig. 2-(3)).
Over flow Strainer
Remove the strainer by pulling it forward (Fig. 3).
Wash off the lint stuck in the stra-iner during overflowing.
Re-install the strainer.
Drain Strainer
Remove the drain strainer from the bottom of the tub using
a sharp tool such as
driver (Fig. 4).
Wash off the lint stuck in the strainer.
Re-install the strainer.
Agitator
Should it be necessary to remove the agitator, say to free an
obstruction, first remove the filter frame by pulling it upward,
and remove the screw securing the agitator to the motor shaft
using
or
driver.
Remove the agitator by pulling it upward.
Free the obstruction and refit the agitator. Ensure that the screw is securely tightened.
Insert the filter frame into the agitator hole.
Figure 2.
Figure 3.
Figure 4.
LINT
( 1)
( 3 )
DW-444PA 00.4.26 11:8 AM ˘
`
4
