20
Initial Setup
VCR Record Quality
You can set the default VCR recording quality to
SP
(Standard Play) or
SLP
(Super Long Play).
SP is higher quality, but SLP provides 3 times the recording time; e.g., a 2
hour tape will record for 6 hours in SLP mode.
Follow the same procedure as the DVD Record Quality.
- - Record Options Page - -
DVD Quality
Chapter Mark
•VCR Quality
SP
•SLP
Choose
OK
Exit
ENTER
SETUP
œ √
…
†
Auto Chapter
During recording, chapter markers are added automatically at fixed
intervals.
You can set this interval to
5 Min
,
10 Min
or
15 Min
.
But when you set DVD Record quality “SEP”, Auto Chapter interval could be
set only ‘10 Min’ or ‘15 Min’.
To turn off automatic chapter marking, select ‘
Off
‘.
Follow the same procedure as the DVD Record Quality.
DVD Record Quality
You can set the default DVD recording quality to: HQ (High Quality - 1
hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) or
SEP (Very Low Quality - 8 hrs/disc).
1
Press [SETUP]. The Setup menu appears.
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
2
Use [
œ
/
√
] to select ‘Record Options Page
‘.
3
While ‘Record Options Page
‘ is selected, press [
†
] to select ‘DVD Quality‘.
4
Press [
√
] to move to the second level.
5
Use [
…
/
†
] to to select the desired Record Quality (
HQ
,
SP
,
EP
or
SEP
).
6
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
RECORDING OPTIONS Settings
- - Record Options Page - -
•DVD Quality • HQ
Chapter Mark
SP
VCR Quality
EP
SEP
Choose
OK
Exit
ENTER
SETUP
œ √
…
†
- - Record Options Page - -
DVD Quality
•Chapter Mark
Off
VCR Quality • 5Min
10Min
15Min
Choose
OK
Exit
ENTER
SETUP
œ √
…
†
DF-Q74D2N-JS 2005.12.8 5:8 PM ˘
` 20 mac001 1200DPI 90LPI
