SETUP
27
• Some options cannot be reset, including Parental Controls, Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu
appears. You must set the country, language, channel, and clock settings again.
If you wish, you can reset the DVD Recorder to its original factory settings.
1
Press [SETUP].
2
Use [
œ
/
√
] to select ‘Restore Defaults Page
‘.
3
Press [ENTER].
4
The Initialize menu will appear. Use the [
…†œ √
] buttons to select
‘OK‘ and press [ENTER].
System Information
System Information helps service personnel identify key firmware
information about your DVD Recorder in case service is required.
Restore Defaults
Initial Setup
- - System Info Page - -
Version
0000BBBBTT
Main Build
VER0049.04
Micom Software
1.0.1
Loader Version
AA0600 A100
Choose
OK
Exit
ENTER
SETUP
œ √
…
†
- - Restore Defaults Page - -
If you select this function all settings
will be removed and the product will be
set into initial (factory) mode.
Choose
OK
Exit
ENTER
SETUP
œ √
…
†
Restore Defaults
Are you sure you want to restore
default settings?
OK
Cancel
DW-Q74D2N-LS(GB)USA 2005.9.21 3:21 PM ˘
` 27 mac001 1200DPI 90LPI
