19
VCR
Oper
ation
18
To Delete Channels Manually
■
After memorizing automatically channels, when the same broadcasting is memorized in more than two
channels, or you want to delete badly displayed channels, follow the procedures below.
■
You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA
(antenna connection).
1
1
Press [SETUP] button and select
“CHANNEL SET”. Select “Add/Remove
Channels”.
2
2
Select the desired channel and delete it.
ADD/REMOVE CHANNELS
Channel 02
is now REMOVED.
To Memorize Channels Manually
■
When the desired broadcasting finished or you want to add unmemorized channels owing to poor signals to
the memory, follow the procedures below.
Press [SETUP] button and select
“CHANNEL SET”.
Select “Add/Remove Channels”.
1
1
Select the desired channel and memorize it.
Press [NUMBER] button of remote control to
select the desired channel to memorize.
When [>] button is pressed, “REMOVED” under
channel number converts into “
ADDED”
.
2
2
Check the memorized channel.
To check the memorized channel, press [CH+/-] button on remote control.
3
3
ADD/REMOVE CHANNELS
Channel 02
is now ADDED.
Memorizing TV Channels
Memorizing TV Channels
Press [SETUP] button.
Press [
] button to move
into CHANNEL
SET, and then select CHANNEL SET with [ENTER]
button.
Select “AUTO CHANNEL SEARCH”.
Press [ENTER] button in CHANNEL SET window
to select AUTO CHANNEL SEARCH.
Select “Detect Automatically”.
Press [ENTER] button in AUTO CHANNEL SEARCH
window to detect the channel automatically.
Please, check the memorized channels.
To check the memorized channels, press [CH+/-] button on remote control.
1
1
2
2
3
3
To Memorize Automatically Channels
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
PREFERENCES
FUNCTIONS
SELECT LANGUAGE
AUTO CHANNEL SEARCH
Now scanning channel 11
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
CABLE
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
CABLE
Selecting cable or antenna viewing
To set the viewing mode:
Press [ENTER] to toggle the setting between CABLE and
ANTENNA in CHANNEL SET screen.
When the desired viewing mode is displayed, press
[SETUP] twice to exit.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
CABLE
Press [NUMBER] button of remote control to select the desired channel to delete.
When [<] button is pressed, “ADDED” under the channel number converts into
“
REMOVED”
.
3
3
To check the deleted channel, press [CH+/-] button on remote control.
Channel number changes successively from 01 to 125, while only broadcasting
channels are memorized automatically. When memory process is completed, the
lowest number’s one of memorized channels is displayed.
