Daewoo DV-K611, User Manual

Page: 13 / 25

21 Time Lapse Video Cassette Recorder
20
Time Lapse Video Cassette Recorder
• Auto / 20sec / 30sec / 40sec / 01min / 02min / 3min /
5min / 10min / 15min / 20min / 25min / 30min :
Recording for the set duration. (min : minute)
• T.END : Records until the tape end is reached when
there is alarm trigger input.
Alarm Recording Counter Display
During alarm recording, “ ” will be flashing on the
display panel.
The maximum display number of alarm triggers is “35”,
at the next alarm recording the counter will indicate
“00”.
Connecting to a Monitor for Normal Recording
✔
• Alarm Counter Reset can
be performed by pressing
the CLEAR key in “Alarm
Time” of Initial Menu
screen.
ALARM
2
ALARM
3
Alarm Recording
Alarm Recording Setting
Alarm recording is performed when there is an input
(trigger) at the ALARM IN terminal, “
” is displayed
on the display panel.
1 Make all necessary connections.
2 Press the MENU, SHIFT
†
, SHIFT
√
buttons in
sequence to display the REC MODE SET menu .
3 Press the SHIFT
†
button until the arrow mark (
√
)
points to ALARM REC SET.
4 Press the SHIFT
√
button to display the ALARM REC
SET menu.
5 Press the SHIFT
√
button to select “YES” or “NO”.
• YES . . . .The alarm recording takes place when there is
alarm trigger input
• NO . . . . The alarm recording does not take place
6 Press the SHIFT
†
button to set the Alarm speed.
7 Press the SHIFT
√
button to select the desired
recording speed.
• 3H . . . 3–hour mode recording
• 6H . . . 6–hour mode recording
• 18H . . 18–hour mode recording
• 30H . . 30–hour mode recording
8 Press the SHIFT
†
button to set the alarm duration.
9 Press the SHIFT
√
button to select the desired
recording duration.
• Auto : Records as long as the alarm signal is being
input. (Minimum 2 minutes is recorded.)
✔
• During alarm recording all
buttons are disabled
except the STOP button. If
the STOP button is
pressed, the alarm
recording will stop.
• If an alarm trigger is
received while alarm
recording is in progress,
the recording duration for
the second alarm will be
calculated from that point.
• When there is a power
loss during alarm
recording, if the power is
restored within the
recording set duration,
alarm recording will
continue.
• When you select ‘Alarm
Duration’ as 20sec,
30sec, 40sec or 1min,
alarm search error may
happen. Therefore confirm
it in ‘Alarm TIme’ menu
and scan it.