3
Power Input:
90~260 Volts AC 50Hz
Power Consumption:
14 Watts (4-head Hi-Fi)
13 Watts (4-head)
Operating Temperature:
5 degree C to 35 degree C
(41 degree F to 95 degree F)
Storage Temperature:
-20 degree C to 60 degree C
(-4 degree F to 140 degree F)
Weight:
5.5 kg
Dimensions:
360mm (Width) X 90mm
(Height) X 312mm (Depth)
Recording System:
4-head Hi Fi: Four video record/playback
heads
Rotary helical scan/luma: FM
recording/chroma: down
converted subcarrier phase shifted
recording
Two audio record/playback
heads
Rotary helical scan, 2 channels
FM recording
4-head: Four video record/playback
heads
Rotary helical scan/luma: FM
recording/chroma: converted
subcarrier phase shifted recording
Video Signal:
NTSC/N-PAL
Antenna:
75 ohm input impedance
Video Signal Level:
1Vp-p
Audio Input Impedance:
47k ohms
Audio Output
Impedance:
Less than 1.0k ohm
Tape Speed:
NTSC: SP: 33.35mm/sec.
EP: 11.13mm/sec
PAL: SP: 23.39mm/sec
LP: 11.70mm/sec
Maximum Recording Time: 480 min, with T-160 Tape
(NTSC EP)
480min, with E-240 (PAL LP)
Fast Forward/Rewind Time: Approx 5min (T-120 or E-180)
Tuning System:
Auto Program/Cable
Compatible/Frequency
Synthesis (FS)
Note: Specifications are subject to change without notice.
SPECIFICATIONS
Cleaning and Lubrication
A. Cleaning the Tape Transport System
The following parts should be cleaned after every 500 hours
of use.
• TENSION POLE
• S-GUIDE POST
• FE HEAD
• S GUIDE ROLLER
• S-SLANT POLE
• VIDEO HEAD/DRUM
• T-SLANT POLE
• T-GUIDE ROLLER
• AC HEAD/AE HEAD
• T-GUIDE POST
• CAPSTAN SHAFT
• PINCH ROLLER
Note: After cleaning with alcohol, allow the parts to dry thor-
oughly before using a cassette tape.
B. Cleaning the Drive System
The following parts should be cleaned after every 500 hours
of use.
• REEL TABLE
• T MAIN BRAKE
• S MAIN BRAKE
• T MAIN BRAKE
• CAPSTAN FLYWHEEL/PULLEY
• REEL PULLEY
C. Lubrication points
The following parts should be cleaned and lubricated after
every 500 hours of use. Apply one (1) or two (2) drops of oil.
Refer to the "Replacement Parts List" for the stock number of
the recommended oil.
• S REEL TABLE POST
• T REEL TABLE POST
• IDLER PULLEY
CLEANING AND LUBRICATION
Summary of Contents for DV-K5J5A
