CONNECTING THE EXTERNAL EQUIPMENT
HEAD PHONE JACK
Insert the headphone plug(ø 3.5mm) into the headphone socket.
The sound from the speaker will be cut off.
TV AND AV(
)
Use the AV button (
) on the remote control or on the front of
the set to select one of the three options. Whenever the AV but-
ton (
) is pressed, the on-screen display will be changed as
shown.
AV1
→
AV2
→
S-VHS
→
TV
→
AV1
SCART JACK1
This is used to connect: a VCR, a PAY-TV decoder, a
Camcorder or a video game console.
In most case, the set changes automatically to AV mode, when
the VCR connected is in play back mode.
If not, press the AV button (
) on the remote control or on the
front of the set.
The (
) 1(AV1) will be displayed on the screen with the cur-
rent programme number.
In AV mode, you can change the TV programme number with the
UP/DOWN buttons or the NUMBER buttons 0..9.
Note that it’s impossible to control the functions except the vol-
ume control and mute function in the RGB mode.
And, you must turn the external equipment off to return to the TV
mode.
SCART JACK2
This is used to connect: a VCR, a Camcorder, a S-VHS VCR.
You can also receive the S-VHS signal with SCART JACK2 by
selecting S-VHS mode with AV button (
).
FRONT/BACK AV JACK
Connect the AV(AUDIO/VIDEO) socket with an appreciate cable
to the corresponding socket of the external equipment.
Select AV mode by pressing the AV button.
Press the AV button to return to the TV mode.
NOTE: The front AV terminal and the back SCART AV2 terminal
are common.
If you use the front AV terminal, disconnect the back
SCART AV2 terminal with the external equipment.
15
Summary of Contents for DTY-25G1
Page 1: ...Instruction Manual Colour Television DTY 25G1 DTY 29G1 ...
Page 19: ...MEMO ...
Page 20: ...P N 48586775E10A R0 ...
