Daewoo DTY-25G1, Instruction Manual

Page: 10 / 20

You can also call up the PRESET menu at the MAIN MENU.
Press the NUMBER buttons 0..9 or UP/DOWN buttons to
select a programme number you want.
The screen will change according to the selected programme
number.
SEARCHING A CHANNELS
Locate a cursor to “
” with LEFT/RIGHT buttons and then
press the UP or DOWN button.
The tuning screen will appear and the cursor will move from
left to right or right to left.
Pressing and holding down the UP/DOWN buttons during 2
seconds, the band will change as follows:
VL-VH-U (For GB, U only).
After searching a station, the tuning screen will disappear.
To stop searching, press the MENU button.
FINE TUNING
If you are unable to get a good picture or sound because of a
poor broadcasting signal, it is possible to adjust the fine tuning.
Move the cursor to
and press UP or DOWN button to
activate fine tuning up or down.
It only operates while the UP or DOWN button is being
pressed.
ENTER A STATION NAME
Select station name in the station name list with UP/DOWN
buttons and press OK button.
If you want to delete a station name, select "----".
If you can't find the desired name in the list, you can enter your
own.
To do so, move the cursor to the right and press OK button.
Using the UP/DOWN buttons, select the desired letter, number
or blank.
Press the RIGHT button to select the next position.
Press the OK button to complete this procedure.
TO STORE PROGRAMME IN MEMORY
Move the cursor to the right end with the LEFT/RIGHT buttons.
Select the programme number that you want to store current
displaying programme with station name, fine tuning data
using the UP/DOWN buttons or NUMBERS 0..9.
Press the OK button.
MANUAL CHANNEL SETTING
PRESET
P01 P
SEARCH UHF >>
PRESET
P01 P
FINE TUNE UHF >
PRESET
P01 P
PRESET
P01 BBC1 P
PRESET
P01 BBC1 P02
- - - -
DRFS
BBC1
BBC2
ITU
CH4
9