Daewoo DTU-14XX AT, Service Manual, Page: 14 / 54

-13-
ALIGNMENT INSTRUCTIONS
4.5.2 OPTION 2 BITS
- Remote control(Bit 7)
This is not intended to be changed by use of the FACTORY remote control.
- NEC/Daewoo Remocon(Bit 6)
User remote control configuration, the choise being between the following;
- NEC remocon(‘1’)
- Daewoo R-49C07(‘0’)
The R-30SVC7 “FACTORY” remote control will never be affected by this setting.
- Local keyboard option (Bit 3 & 2)
- Digital eye ON/OFF(Bit 1)
Enables/disables the digital eye function.
When enabled and selected, the microcontroller measures DC level on IC pin 15, and adjusts
picture setting according to the table below.
- PARS Logo ON/OFF(Bit 0)
Enables/disables the display of PARS logo at power on.
4.5.3 OPTION 3 BITS
- Curtain function at power ON(Bit 7)
Enables/disables the curtain function at power ON. The frequency and volume of associated
beep sound is controlled by NVM data.
11 10 01 00
0 mV ~ 220 mV Not used Menu Menu
22 mV ~ 620 mV (TV/AV) Menu TV/AV Prog. Up
620 mV ~ 1.06 V Vol. Up Vol. Dwn Prog. Dwn Not used
1.06 V ~ 1.48 V Vol. Dwn Vol. Up Vol. Up
1.48 V ~ 1.79 V Prog.Up Prog. Dwn Vol. Dwn
1.79 V ~ 2.07 V Prog.Dwn Prog. Up TV/AV
Brightness Contast Colour Sharpness
0 mV ~ 450 mV 18 30 28 27
450 mV ~ 900 mV 28 46 28 29
900 mV ~ 1.35 V 30 50 29 30
1.35 V ~ 1.80 V 32 55 30 31
1.80 V ~ 2.25 V 34 60 31 32
2.25 V ~ 2.70 V 36 63 32 33