-10-
ALIGNMENT INSTRUCTIONS
4
4.5.2
OPTION 2 BITS
Remote control(Bit 7)
This is not intended to be changed by use of the FACTORY remote control.
NEC/Da
ewoo Remocon (Bit 6)
User remote control configuration, the choice being between the following;
§ NEC remocon ( 1)
§ Daewoo
R-46G22
( 0)
The R-30SVC7 FACTORY remote control will never be affected by this setting.
AV out option (Bit 5)
This allow you to select the desired signal at output pin 46. When set to 1 the output is monitor
out otherwise the output is the CVBS signal demodulated from the tuner IF. Sound output is also
switched (#37 and #38).
Local keyboard option (Bit 3 & 2)
11
10
01
00
0 mV ~ 220 mV
Not used
Menu Menu
220 mV ~ 620 mV
(TV/AV) Menu
TV / AV
Prog. Up
620 mV ~ 1.06 V
Vol. Up
Vol. Dwn
Prog. Dwn
1.06 V ~ 1.48 V
Vol. Dwn
Vol. Up
Vol. Up
1.48 V ~ 1.79 V
Prog. Up
Prog. Dwn
Vol. Dwn
1.79 V ~ 2.07 V
Prog. Dwn
Prog. Up
TV / AV
Not used
Digital eye ON/OFF (Bit 1)
Enables/disables the digital eye function.
When enabled and selected, the microcontroller measures DC level on IC pin15, and adjusts
picture setting according to the table below.
Brightness
Contrast
Colour
Sharp ness
0 mV ~ 450 mV
18
30
26
27
450 mV ~ 900 mV
28 46 28 29
900 mV ~ 1.35 V
30
50
29
30
1.35 V ~ 1.80 V
32
55
30
31
1.80 V ~ 2.25 V
34
60
31
32
2.25 V ~ 2.70 V
36
63
32
33
PARS Logo ON/OFF (Bit 0)
Enables/disables the display of PARS logo at power on.
4.5.3
OPTION 3 BITS
Curtain function at power ON(Bit 7)
Enables/disables the curtain function at power ON. The frequency and volume of associated
beep sound is controlled by NVM data.