Daewoo DTS-42, Instruction Manual

Page: 15 / 80

15
Remote Control
When Using Remote Control:
•
Be sure not to allow the Remote Control to drop or to become wet.
•
Keep it away from hot or moist locations.
Installing the Batteries in your Remote Control:
•
Push to open the cover of the remote controller
•
Set the batteries in the battery cell after checking the
electrode, and then shut the cover.
TV/VIDEO(DVD)/SAT/CATV
Use to select channel directly 0~9
Indicates the current state and resolution.
Use this function to make video input selection.
It changes in the following sequence
TV -> Video1 -> Video2 -> TV
Used to zoom the screen. To enlarge, press the(+)
button, and to return to the previous condition, press
the(-) button.(Zoom Mode : Zoom 0~20)
Used to display a desired menu.
Pressing the Power button of the TV allows
the Display to be standby. (Red light is
shown in the Remote Control Sensor.) At
this time, if you press the Power button of
the Remote Control, the Display is turned
ON (Green light in the Sensor).
Use it when selecting a channel number of
over 100
Use this function to make video input selection.
It changes in the following sequence PC -> DVI
-> Component 1-> Component 2 -> PC
Adjusts the size of the screen
(Normal, 16:9, etc.)
This feature allows you to choose the caption.
Display button
TV/VIDEO
ZOOM button
Menu button
Volume button /
Adjusts the volume.
Screen Size button
Caption button
Power button
100
Channel number (0~9)
Multimedia
CH button /
Adjusts the channel.
Note
• Use two “AAA” batteries.
• Be sure to use replacement batteries of the
same type as the original ones.
• The life of a battery depends on how much
it has been used.
*
The number in ( ) indicates the page in which
the function of each button is explained in detail.
VIDEO/
DVD SAT TV CATV
DISPLAY
MULTIMEDIA TV/VIDEO
CH
CH
V
O
L V
O
L
ZO
O
M
+ Z
O
O
M
-
MENU
P
R
E
V
CH
SC
RE
EN
S
IZ
E
MUTE CAPTION
F.F/SLOW PLAY F.R/SLOW
REC STOP PAUSE
PREV OPEN/CLOSE NEXT
PICTURE
MODE
SOUND
MODE STILL
POWER
MTS
ADD/
ERASE SLEEP
It returns to previous channel.
Previous Channel button
Mute sound.
Mute button
Every press of the button cycles through the
four different.
Normal -> Dynamic -> Cinema -> User.
Picture Mode button
This feature allows you to select the language and
stereo sound while broadcasting
MTS button
The feature either memorizes the current channel
or erases a channel that has previously
memorized.
CHANNEL ADD/ERASE
VIDEO/DVD Function
Used to view a still picture during watching
moving images.(Sound can be heard.)
Still button
Every press of the button cycles through the five different
modes: Normal -> Movie -> Music -> News -> User.
Sound Mode button
Each time you press this button, a different input mode
appears. The sequence is as follows: 15Min. -> 30Min. ->
60Min. -> 90Min. -> 120Min. -> OFF
After the time is selected, it automatically becomes stand-
by state.
Sleep Timer button
20
58
65
48
54
55
77
21
60
58
52
22
20
57
24
45