Daewoo DTM-2930MP, Service Manual, Page: 10 / 66

ALIGNMENT INSTRUCTIONS
4.5 CONTROL DESCRIPTION
4.5.1 OPTION 1 BITS
- TOP Teletext(Bit 7)
Enables/disables the TV from displaying TOP row 24 link titles, and the dedicated TOP menu
table. A FLOF (if available) or SIMPLE / PAGETRACE presentation will be used.
- FLOF/Fastext (Bit 6)
Enables/disables the TV from displaying FLOF row 24 link titles. A TO P(if available) or
SIMPLE/PAGETRACE presentation will be used.
- Tube(Bit 5)
Define as 4:3 or16:9 tube. This will permit the ZOOM function to understand the formats that
should be available.
- Teletext ON/OFF(Bit 4)
Enables/disables the Teletext on TV. If Teletext is disabled, user can not select clock prog and
zoom selection in features menu. WSS is also disabled.
- Dolby Virtual(Bit 3)
Allows Doby Virtual (trademark) 3D effect to be available from the user control(button “3D”).
Note : Dolby Virtual is only available with some UOC reference.
- Tuner(Bits 2,1 & 0)
Configures the software to communicate with the tuner via i2c bus. Incorrect configuration may
not be immediately obvious, but will result in loss of functionality (e.g. unable to tune UHF
channels, unable to tune some hyperband channels).
Bit2
Bit1 BitO
LAN Tuner
0 0 0
No Philips (external AGO)
0 0 1
No Philips (internal AGO)
0
1
0
No LG
0 1 1
No Partsnic / Samsung
1
0 0
-
Should not be used
1
0
1
-
Should not be used
1 1 0
Yes LG
1 1 1
Yes Partanic/Samsung
See also NVM mapping to configure parameters for automatic AGO adjustment when external
AGO is used. When internal AGO is used, the TOP is stored in NVM.
-9-