The install menu lets you tune in broadcast channels and other equipment, automatically or manually, and
edit the list of stations stored under programme numbers. You can change the name given to a channel or
enter a name for a piece of equipment you tuned in.
Select the install menu and select items
using the volume and PR buttons (see
'Menus for controlling and setting up the
television).
Remember if you do not press a button within
30 seconds the menu will go off.
At any time you can press the MENU button
repeatedly to return to normal viewing.
Highlight a line in the menu with the PR buttons.
Automatic tuning (ATSS)
The automatic tune, search and store process (ATSS) is described in 'Tuning in the programmes'.
Editing programmes
See this heading on the next page.
Manual tuning
•
Use manual tuning to tune in any extra item of equipment connected by the aerial lead.
•
Manual tuning by frequency is very useful if you are trying to tune a non-standard frequency,
which might be generated by some types of external equipment. An example would be an
older video recorder or analogue satellite receiver which has a simple output signal modulator
with an adjustment screw on the back: this illustration shows a typical adjuster. See
'Frequency' below.
Current program number
Using this feature you can check what has already been tuned in or use an already-tuned channel as a starting
point for manual tuning.
Highlight this line by pressing one of the PR buttons.
You can see the picture that goes
with the current programme num-
ber as you change the number with
the volume buttons( ).
The install menu
10
INSTALL
ATSS GB
EDIT
SYSTEM GB
CHANNEL C55
FREQ 743.25
NAME BBC1
PROGRAM 01
STORE TO
01
V
Position
CB
Adjust
W
OK Access
MENU Exit
TV system selection by contry
Broadcast channel number
Frequency
Channel name
Current programme number
Programme storage number
C H
A D J
Automatic tuning and sorting
system
Editing programmes
Country for automatic tuning.
Items in the dotted line are
described under ‘Manual tuning’.
Display content may vary.
M
Press the menu button
Select ‘INSTALL’
Press the OK button
PR
PR
PR
PR
PR
PR
PR
PR
NORMAL/OK
PR
PR
PR
PR
PR
PR
