Daewoo DTC-29G4, Instruction Manual, Page: 19 / 23

In order to change from TV mode to AV mode, press AV ( ) button on the
18
TV ( ) & AV ( )
Pushing this button cuts off the sound reproduced from the speaker and then
"
" will be displayed on the screen with red colour. To return the sound, press
it again.
MUTE( )
●
This is used to switch the SYSTEM of the TV set.
●
Press the SYSTEM button, then the SYSTEM will be
displayed as shown in the right figure. The SYSTEM
consist of COLOR and SOUND.
●
At first, the SYSTEM is preset to COLOR: AUTO, SOUND:
B/G at the factory.
●
If you want another SYSTEM, place the cursor at the COLOR or SOUND by
using DOWN/UP button and press LEFT/RIGHT button. Whenever you press
this SYSTEM button, COLOR SYSTEM is changed as follow:
AUTO
↔
PAL
↔
SECAM
↔
NTSC 4.43
↔
NTSC 3.58
↔
AUTO
and SOUND SYSTEM is changed as follow:
B/G
↔
I
↔
D/K
↔
M
↔
B/G
●
If you get No color or Noise SOUND from this TV set, it is necessary to check
current COLOR and SOUND SYSTEM.
SYSTEM
SYSTEM
COLOR: AUTO
B
SOUND: B/G
remote control unit or TV/AV SELECTION button ( / ) on the front of
the receiver. At this time, the AV(VIDEO 1 or VIDEO 2) is displayed on the
upper right side of the screen.
In case of changing from AV mode to TV mode, press TV
(
) button on the remote control unit or TV/AV select
button ( / ) on the front of the receiver.
In AV mode, the main MENU is displayed as follow picture.
MENU
B
PICTURE
SOUND
TIMER
LANGUAGE