Daewoo DTC-29G4, Instruction Manual

Page: 10 / 23

• Before plugging in, confirm that your power supply is suitable. This receiver is
designed to operate with AC 110~250V, 50/60 Hz range.
Do not operate the receiver on DC power supplies or any other voltage.
• Plug the code into the main outlet.
• Switch the receiver on by pressing the MAIN POWER SWITCH ( ). In this
case the STAND-BY INDICATOR( ) will illuminate, then the TV will be in
Stand-by mode.
• Next press the PROGRAMME DOWN/UP button ("PR
W
/
V
") in front of the receiver
or POWER button ( ) or PROGRAMME DOWN/UP button ("PR
W
/
V
")on the
remote control unit.
The STAND-BY INDICATOR will be turned off and a picture appear.
First, the programme number appears on the upper left side of the screen and
then disappear after about 5 seconds.
• Press the POWER button ( ) on the remote control unit to return the set to
Stand-by mode.
9
OPERATION OF CONTROLS
POWER ON/OFF
In normal TV mode, these are direct programme selection buttons.
PR SELECTION BUTTONS
In normal TV mode, these are sequential programme selection button, but
"SKIP ON" programme number cannot be selected.
On the screen, "POS. NO" indicates programme number.
(Refer to "SKIP ON/OFF" at page 15)
DOWN & UP ("PR
W
/
V
")
1 2 3 4 5 98 99 0 1
SKIP ON SKIP ON SKIP ON
PR PR
PR
PR