Daewoo DTC-2987, Instruction Manual

Page: 19 / 22

In order to change from TV mode to AV mode, press AV ( ) button on the
18
TV ( ) & AV ( )
Pushing this button cuts off the sound reproduced from the speaker and then
"
" will be displayed on the screen with red colour. To return the sound, press
it again.
MUTE( )
This is used to switch the SYSTEM of the TV set.
Press the SYSTEM button, then the SYSTEM will be
displayed as shown in the right figure. The SYSTEM
consists of COLOR and SOUND.
At first, the SYSTEM is preset to COLOR: AUTO, SOUND:
B/G at the factory.
If you want another SYSTEM, place the cursor at the COLOR or SOUND by
using DOWN/UP buttons and press LEFT/RIGHT buttons. Whenever you
press this SYSTEM button, COLOR SYSTEM is changed as follows :
AUTO PAL SECAM NTSC 4.43 NTSC 3.58 AUTO
and SOUND SYSTEM is changed as follows:
B/G I D/K M B/G
If you get No color or Noise SOUND from this TV set, it is necessary to check
current COLOR and SOUND SYSTEM.
SYSTEM
SYSTEM
COLOR: AUTO
SOUND: B/G
remote control unit or TV/AV SELECTION button ( / ) on the front of
the receiver. At this time, the AV(VIDEO 1 or VIDEO 2) is displayed on the
upper right side of the screen.
In case of changing from AV mode to TV mode, press TV
(
) button on the remote control unit or TV/AV select
button ( / ) on the front of the receiver.
In AV mode, the main MENU is displayed as shown in the
right picture.
MENU
PICTURE
SOUND
TIMER
LANGUAGE