background image

14

1. AUTO MEMORY

Auto Memory function will search and store all
availables station. Place the cursor at AUTO MEMORY
and press ENTER or LEFT/RIGHT buttons.
Then POS. MEMORY menu is displayed as shown in
the right figure.
SOUND(B/G, I, D/K, M) can be selected by pressing PR UP/DOWN buttons.
(B/G: Middle asia, D/K: China, Russia)
Press ENTER or LEFT/RIGHT buttons after selecting
the wanted SOUND.
The TV will automatically tune itself to all channels
from 0-99 and from

VHF L 

VHF H 

UHF

In case of having signal, it will be stored in programme number "1" first and
as the programme number increase, it will continue to search for next station.
When all 100 programmes are stored or the searching of the all available
stations is completed, it will be displayed nothing. AUTO MEMORY is
cancelled by LEFT/RIGHT or POWER button.

2. MANUAL MEMORY

Place the cursor at MANUAL MEMORY by using
DOWN/UP buttons and press ENTER or
LEFT/RIGHT buttons. Then, MANUAL MEMORY
menu is displayed as shown in the right figure.
To return to the previous menu, press MENU button.

2-1. POSITION No.
The programme number is changed by using LEFT/RIGHT buttons or PR
SELECTION buttons 0-9.

2-2. BAND
Place the cursor at BAND by using DOWN/UP buttons and press 
LEFT/RIGHT buttons, then channel band will be changed as follows:

VHF L 

VHF H 

UHF 

VHF L

2-3. SEARCH DOWN/UP
Place the cursor at SEARCH mode by using
DOWN/UP buttons and press LEFT or RIGHT button,
then OSD bar goes to the left or right. During that
time, the letter of DOWN or UP start to flicker. When a
channel is found, this operation will be stop. After that,
if this is the desired channel, you must save this channel at STORE POS.
No.(Refer to 2-4). When the tuning reaches to the top of the band, it will be
changed to the next band.

POS.MEMORY

MANUAL MEMORY
AUTO MEMORY
SOUND : B/G

I

D/K

M

MANUAL MEMORY

POSITION

01

BAND

VHF-L

SEARCH

DOWN

STORE

POS. 01

SKIP

OFF

MFT

DOWN

|||||||| 

MANUAL MEMORY

POSITION

01

BAND

VHF-L

SEARCH

DOWN

STORE

POS. 01

SKIP

OFF

MFT

DOWN

|||||||| 

AUTO MEMORY   11 UHF

|||||||| 

Summary of Contents for DTC-2987























Reviews: