Daewoo DSL-20D1T, Service Manual

Page: 17 / 37

17
Factory Mode
Remark : These modes are used for factory only.
Digit 1 Key (Heat-run & Test pattern mode)
● Pressing this key, the Test pattern will be displayed as follow;
Normal
→
Red pattern
→
Green pattern
→
Blue pattern
→
White pattern
→
Normal
● Note that you can exit from this mode with this key only.
Digit 2 key (Picture Control Checking)
● Pressing this key, the Picture control value will be changed in sequence automatically.
Brightness (min max center) → Contrast (min max center) → Colour (min max center)
→ Sharpness (min max center) → Tint (left right center) → Normal
Digit 3 Key (Sound Control Checking)
● Pressing this key, the Sound control value will be changed in sequence automatically.
Treble (min max center) → Bass (min max center) → Balance (left right center) →
Volume (min max center)
Digit 6 key (Outgoing)
● Pressing this key, OSD “Outgoing” will be displayed during initializing the EEPROM data,
and then the set will be turned off automatically.
No. Item Data No
.
Item Data
1 CH data (PR0-99) CH52 2 Station Name - - - - -
3 SKIP (PR2-99) Yes 4 System - -
5 Colour - - - 6 Fine tune center
7 Bri /Cont/Col/Sharp Normal 8 Treble/Bass/Balance Center
9 Sound Spatial No 10 Sound Forced Mono Off
11 Volume 30/100 12 Child lock No
13 OSD Opaque 14 Language English
15 TV shape 4:3
●
When you turn on the TV set for the first time, the Language menu for the on-screen display
appears.