Daewoo DSD-9251MA, Service Manual

Page: 4 / 53

3
General Information
If at any time when you using the menus you want to return to the normal TV mode, press the TV/AV button.
The DSD-9251MA Mis easy to use, always at your command and adaptable for future advances.
Please be aware that new software may change the functionality of the DSD-9251MA
Should you experience and difficulties with the operation of your DSD-9251MA, please consult the relevant section of
this manual, including the Problem Shooting, or alternatively call your dealer or a customer service adviser.
PR
PR
PR
OK/LIST
MENU
TV/RADIO
EXIT
PAUSE
TXT TV/AV
L
R
INFO EPG
UHF ALT-AUDIO
Key Function
Switches between the operational mode and stand-by
mode of the receiver (Green lamp lights up during the
operation, Red lamp lights up in stand-by mode)
TV/ RADIO Switches between TV and Radio mode.
Mutes the sound.
Switches back to previous channel.
INFO Shows information of the current channel.
MENU Displays menu on screen, and calls command box.
EXIT Returns to the previous menu on the menu screen.
ALT-AUDIO When watching a channel, switches the audio
languages.
EPG Calls up the EPG
(Electronic Program Guide)
OK/LIST Executes the selected item in the menu screen, or
enters the desired value in any input mode.
0 - 9 Enter the number in the required menu item or select
a channel number to watch.
PR When watching, changes channels, or moves to the
next higher or lower item in the menu.
When watching, adjusts the volume, or moves to the
left or right item in menu.
Moves up / down a page in the channel list.
PAUSE
Press once to freeze the screen picture.
Press once again to go to the normal mode.
Selects the different audio model.
TXT Switches to the Teletext mode.
UHF Switches to the UHF Tuning Mode.
TV/AV Switches between TV and AV mode.
L
R
PR
7. Remote Control
6. About the Smart Card and CA Module
To be able to receive scrambled digital satellite channels you will need a
Common Interface CA(Conditional Access)module and a smartcard from a
Service Provider. It is possible to use two CA modules. The Service Provider is
the programme distributor. The Servide Provider is the programme distributor. If
you are subscribing to servides from more than one Servide Provider, you might
have to change between different Smart-cards and/or CA modules. Please note
that a Smartcard and CA module may only be valid for a single Service Provider
and due to this, a specific range of channels. The Smartcard and the CA module
may also provide access to speacial menus not described in this manual. If so,
please follow the instructions from the Servide Provider. Only free to air
channels are available without the Smartcard and/or the CA Module.
Note : The Smartcard and/or the CA module are distributed by your Service
Provider. After inserting the card, leave it in the solt permanently. Do not remove
it again, unless your Service Provider asks you to do so. This is important,
because if your Servide Provider wants to download new information to the
Smartcard, the card has to be in the slot.