12
1. Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in
the remote display.
2. Press the MODE button until the Quick
(
“
”
) indicator appears in the display.
TO SET UNIT TO QUICK MODE
To set this unit to cool at the highest power, follow the procedures below:
3. The unit will then start cooling the room at the highest
power.
2. While the unit is off, press the TIMER ON button; the
display will light waiting input for the timer, but the
actual unit will not turn on.
3. Repeatedly press the TIMER ON button until the
desired hour that you want the unit to turn on appears
on the display. For example, if it is 1:00 P.M. and you
want the unit to turn on at 4:00
P.M., select 3 hours.
4. Press the ENTER button to input the setting into
memory; the unit will beep, the TIMER indicator will
light on the unit and the TIMER indicator on the
remote will light to indicate the
unit is in the timer mode.
1. Press the ON/OFF button of timer on the remote control to set the on timer mode, “HOUR” and “ON” on the remote display
will be displayed and “TIMER” will be flicked. When you increase to press “ON/OFF” you will get desired time. Then, if press-
ing “ENTER/CANCEL” button, ON TIMER Mode will be started. If you want to stop ON TIMER Mode, please press
“ENTER/CANCEL” again.
TO SET THE ON TIMER MODE
This unit can be set to automatically turn on after a predetermined amount of hours (up to 24) in the order of
0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 12, 16, 20, 24.
5. When the desired hour is reached, the unit will turn on
to the selected mode.
AUTO
NOTE :
Press the ENTER button within 5 seconds
of selecting the desired time. If mote than 5 seconds
elapse, steps 3 and 4 must be repeated.
