• 9 •
SECURITY
• Before operation, check if the voltage
of the unit is in line with the local
voltage.
• Hold the plug to disconnect it from
the mains outlet. Do not pull the
power cord.
• When the plug of the unit is connected
to the mains outlet , the unit will
be still connected to AC even if the
power is turned off.
• Disconnect the plug as soon as liquid
or objects enter the unit. The unit
can not be used until being checked
by experts.
• Do not open the cabinet for laser
rays employed by the unit may
damage eyes. Any servicing should
be done by qualified service personnel.
PLACEMENT
• Put the unit where ventilation is
good enough to prevent overheating.
• Never put the unit in direct sunlight
or near heat sources.
• Put the unit horizontally, never put
any heavy object on the unit.
• To protect the pickup, do not put the
unit where there is most dust . If
there is dust on the pickup, use a
cleaning disc to clean it.
• Refer to the operation instructions of
the cleaning disc you bought.
CONDENSATION
Water will appear on the pickup lens
in the following cases:
• The unit is suddenly moved a cold
place to a warm place.
• The unit is put in a room with a heater,
or in cold air from a air- conditioner.
• Use the unit in a humid place.
In these cases, the unit can not work.
Unload the disc and leave the unit on
for about one hour to evaporate the
water.
CLEANING
• Use soft cloth with a little neutral
detergent to wipe the cabinet, panel
and controls. Never use abrasive
paper, polishing powder or solvent
like alcohol and gasoline.
HANDLING DISC
• To keep the disc clean, do not touch the
playsides of the disc.
• Do not attach paper or tape to the disc.
• Keep the disc away from direct
sunlight or heat sources.
• Store the disc in a disc case after
playback.
CLEANING DISC
• Before playback, wipe the disc
outwards from the center with clean
cloth.
• Do not use any type of solvent such as
thinner, benzine, commercially
available cleaners or antistatic spray.
6
. BEFORE OPERATION
7
. PRECAUTIONS FOR DISC
Summary of Contents for DS-2000
Page 37: ...DS ...