Selecting INPUT SIGNAL
58
NOTES:
1) If an external device is not connected or INPUT signal is not
applied a Warning Message (“No Signal”) will be displayed.
2) In this case, check if external device is connected and/or
terminal connection is properly fitted.
3) Also, you can select input using [INPUT SELECT] button in
the keypad of the PDP unit. The sequence of selection is as
follows:
TV -> AV1 -> AV2 -> AV3 -> Component ->
PC -> HDMI -> TV
Component
TV
• “
TV ” button
AV1
AV2
AV(S)3
• “
AV ” button
Component
PC
HDMI
• “
MULTIMEDIA” button
Press the Input Signal Selecting Button.
• Press the “TV”, “AV” or “MULTIMEDIA” button on the
remote control, or select the desire input signal using
Keypad of the PDP unit.
• Each time you press input mode buttons, a different input mode
appears. The sequence used is as follows:
1
INPUT SIGNAL
• Used to select
INPUT signal of
external device
connected to the
PDP.
Summary of Contents for DPP-42A2
Page 75: ...48586900E10U R0...
