Daewoo DLA-32C7LAB, Service Manual

Page: 66 / 73

H W
A A
N L
G L
E
R
U
N
I
T
HANGER AS UNIT
8
Assemble connecting frame C with wall hanger frame B and installing it on the wall
Assemble the connecting frame C with the wall hanger frame B
Attach the paper model for arrangement of the wall hanger assembly
Align the fixating part of frame B to the
marked location by the set.
Screw the included screws (M5) on the left
and right side of the wall hanger frame B
and connecting frame C.
Attach the paper model for arrangement of
the wall hanger assembly (actual size) on
the installation location with glue or tape. After checking the set model, drill the holes on
the wall on the location marked on the paper
model for arrangement with a hand drill.
Clean each drilled hole.
Connecting Frame C
Frame B
Hand drill
Paper pattern plan
Paper pattern plan
1
2
Note
When assembling the frame B and the connecting frame
C, make sure there aren’t any twists among the parts.
If there are any twists, it can cause a defect on the wall
hanger connecting frame C.