Quick operation guide
For detailed operating method read the corresponding content on the istruction manual.
Switch on the appliance
Once all installation is done correctly,
Switch on the power and press
button.
Fill the detergent dispenser
A
: Main wash
detergent
B
: Pre-wash
deteregent
A
B
Check the rinse aid level
C
C
: Mechanical indicator
Check the salt level
If there is a salt warning
light on the control panel,
refil the salt following the
instruction on page 7.
Load &
Select the programme
Scrape off any remaining food on the
plate and load them correctly.
Then, close the door and select the
program . Once you press START button,
it will be running after 10 seconds.
Changing the program?!
If the cycle is running less than 2 minutes,
press Pause button -> press Program
button more than 3 seconds to cancel the
running cycle-> Select the new program->
Press the start button again.
Ca
ution
The programme should not be changed
if it has been running more than 2 minutes .
We do not recommend to change the
cycle once Start button has been pressed.
Switching off the appliance
The end signal alarm goes off for 8 times
when the cycle is finished.
Press the Power button to turn off the
appliance.
4
