•
Connection of drain hose
Installation guide
A
B
Counter
MAX 1000mm
Drain pipe
NOTE.
The top of the hose must
be at a height between
40cm and100cm.
The free end of the hose
must not be immersed in
water.
MIN 400mm
40mm
For connecting the hose , you could choose either way A or B.
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to avoid
bending or crimping it. The top of the hose must be at height between 400mm and 1000mm.
The free end of the hose must not be immersed in water to avoid the back flow of it.
•
Position the appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the
adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be positioned either
to the right or the left sides to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned for levelling, the height of the
dishwasher may be altered via adjustment of the screwing level
of the feet.
In any case, the appliance should not be inclined more than 2°.
•
Water supply and cold water connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time,
let the water run to make sure that the water is clear.
This precaution is needed to avoid the risk of the water inlet to be blocked and
damage the appliance.
Povided water supply hose has Aqua-stop system. Ensure that water supply hose’s
Aqua-stop pipe is connected to the water tap also!
Attention!
• For water connection, ensure you connect to COLD water supply!
• Water pressure msut be between 0.04MPa - 1MPa.
• Do not use used hose.This appliance must be connected with provided hose-sets.
17
