The following things should be checked before starting the dishwasher.
The content of this manual is very helpful to the users.
After installation, please make sure to keep this manual.
1
The dishwasher is level and fixed properly
2
The inlet valve is open
3
There is a leakage at the connections of the conducts
4
The wires are tightly connected
5
The power is switched on
6
The inlet and drain hoses are knotted
7
All packing materials and printings should be taken out from the dishwasher
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced .
Water Outlet
Connect the water drain hose. The drain hose mu st be correctly fitted to avoid water lea ks.
Ensure that the water dra in hose is no t kin ked or squashed.
If th e sink is 1000 higher from the floor, the excess water in hoses cann ot be drained dire ctly
into the sink. It will be necessary to drain excess w ater from hoses into a bo wl o r suitable
containe r that is held outside and lower th an the sink.
How to Drain Excess Water From Hoses
Syphon Connection
The waste conne ction must be at a he ight less than 10 0 cm (maximum) from the bottom of the dish.
The water drain hose sho uld be fixed .
