Dishwasher
Edition: 2011-12 Model:
DDW-G1213E
7
supply and leave the door of the appliance slightly ajar. This will help the seals
last longer and prevent odors from forming within the appliance.
5.
Fault finding
Resolving minor problems yourself
Experience has shown that you can resolve most problems that rise during
normal daily usage yourself, without having to call out a service engineer. Not
only does this save costs, but it also means that the appliance is available for use
again that much sooner. The following list of common occurrences and their
remedies should help you identify the causes of most problems.
Problems...
...when the appliance is switched on
Appliance does not start up
--Fault with fuse in mains electricity supply.
--Plug not inserted in wall socket.
--Appliance door not closed properly.
--Programme button has not been pressed.
--Water tap not turned on.
--Blocked strainer in water intake hose.
--- The strainer is situated in the Aqua-stop or supply-hose connection.
Service Diagnostics Cycle Note
Press the “ON/OFF” and “Delay “buttons, after the buzzer emits 2 short signal, all
the LED indicators will be lighted, and the LED display shows
888
, the dishwasher
entry the service diagnostic cycle.
Summary of Contents for DDW-G1213E
